Kitchen & Bath Cabinetry, Advice & Design Blog by Lakeville Kitchen & Bath » Cabinet Basics

Introducing Lakeville Kitchen & Bath Q & A!

Lakeville KB — Wed, 22 Sep 2010 18:52:45 +0000

Certain questions tend to come up regularly to our salespeople, and we thought we might share a few of them with you. Today’s question concerns something you might not have thought a lot about: the undersides of your cabinets.

Q: Should I finish the undersides of my cabinets to match?

A: Most often they will be under the sight line, so it’s really a matter of preference. If you choose from a semi-custom or full custom line, they will not be raw wood anyway.

Face frame cabinets normally have a 3/4″ recess underneath. Depending on the manufacturer, this can either be finished at the factory to match the doors, or the recess can be eliminated and a flush finish bottom applied instead. Frameless or European-style cabinets have a flush bottom already, but you must specify if you want it finished (usually a special option).

Tip: If using undermount lighting, you may want to consider a piece of decorative moulding to bring the sight line down.

If you have any questions you’d like to see answered here on the LK blog, we welcome your submissions!

The Eternal Debate: Particleboard or Plywood?

Lakeville KB — Fri, 05 Feb 2010 19:11:47 +0000

Few things are as polarizing in the world of cabinetry as particleboard and plywood box construction. The former is often unfairly dismissed as inferior before even getting proper consideration. Modern particleboard is nothing like the old-fashioned “flakeboard” of yesteryear.

Particleboard is engineered wood. The composite is created by mixing wood chips (“particles”) with a professional-grade adhesive; this is then pressed, producing a dense, strong, uniform material perfect for cabinet boxes.

Plywood is also a manufactured product. In this case, it is created by gluing thin sheets of wood together in layers, resulting in a strong material much less likely to warp or crack than solid wood. It is often used for cabinet boxes, but will be more expensive than particleboard.

Both materials are suited to numerous finishes and perform well in either the kitchen or bath. What’s important to remember is that while particleboard might be more cost-effective than plywood, it is not a lesser product; don’t rule it out when designing your project.

Framed vs Frameless Cabinetry

Lakeville KB — Thu, 28 Jan 2010 16:34:06 +0000

Cabinets are constructed in two basic forms: framed and frameless. Which one is right for you? Here are the fundamental differences:

Framed cabinets are the most common type. The particle board or plywood box is held together by a ¾” thick frame applied to the front. A reveal is visible between the doors and drawer fronts: overlay, where there is a larger reveal between and around doors / drawer fronts (this is the traditional look with which most people are familiar), full overlay, which has a smaller reveal (giving a look frequently considered modified European – which is similar to frameless), or inset, where doors and drawer fronts lie flush with the front edges of the cabinet box.

Frameless cabinetry is often called Euro-style due to its origination and predominance overseas. The box is made of particle board or plywood panels covered with wood, wood veneer, or laminate. There is minimal reveal between doors and drawer fronts, resulting in a streamlined, modern look.

Lakeville offers a wide selection of both framed and frameless cabinetry, in a variety of styles and finishes. Browse the manufacturers on our website and find one that’s perfect for your project!